• Speed upto 35,000 RPM.
• Forward & reverse direction selection.
• Hand & foot operation.
• Extra torque for smooth working.
• Low heat generation suitable for long use.
• No noise & vibrations.

Waldent Clinical Micromotor is designed to facilitate more user-comfortability for the professional and a significant reduction in procedural times for their patients.

• Waldent Clinical Micromotor used for hard tissue trimming (teeth, bone).
• It is also used in denture trimming polishing of prosthesis.

INDICATION : A dental drill or handpiece is a hand-held, a mechanical instrument used to perform a variety of common dental procedures including removing decay, polishing fillings, and altering prosthesis.

ADVANTAGES :

• High-powered 35,000 rpm.
• Non-stage speed system (it’s well designed to output from zero to 35,000rpm by using a non-stage speed system).
• Right & Left turning ability.
• Foot ON/OFF switch system.
• Compact and portable size
• Continous variable speed control
• One- touch change of the driving direction for efficient operation
• No noise

COMPOSITION:

• Made up of high-quality Stainless steel material.

TECHNICAL SPECIFICATION

• Max Speed – 35,000 rpm
• Torque – 2.9 Ncm
• Input – 100,110/220, 240V (50/60 Hz)
• Output – 32V

• Check that the power switch is set to an OFF position.
• Confirm adequate power line voltage (100V to 240V).
• Connect the power supply to the electrical mains.
• Connect the power cord to the EndoStation by inserting the connector into the receptacle on the rear aspect of the device. Make sure the power cord is well-fitted.
• Place the footswitch properly to allow easy operation.
• Connect the footswitch cord into the receptacle at the front panel of the device.
• Pay attention to align the plug with its receptacle.
• Plug the micromotor cord to the device.
• Pay attention to align the plug with its receptacle.
• Plug the E-type contra-angle handpiece onto the micromotor and the handpiece head to the handpiece, if applicable.