Prevest Fusion Universal Composite Kit

• Extremely high abrasion resistance
• Higher filler contents
• Excellent physical properties for long lasting restorations
• Lower polymerization shrinkage than conventional composites

It is a visible light cured, radiopaque highly filled, nano filled hybrid composite restorative material for all cavity classes of anterior and posterior teeth.

INDICATIONS

• Direct Restoration of all cavity classes in anterior and posterior teeth.
• Preventive polymerization and repairs of composite ceramic veneers.
• Correction of shade and shade for better aesthetics.
• Core build-up & Composite inlays

ADVANTAGES

• Excellent physical properties for long-lasting restorations.
• Lower polymerization shrinkage than conventional composites.
• Higher filler contents.
• Extremely high abrasion resistance.

COMPOSITION

Bisphenol  A Glycidyl methacrylate

Bisphenol a diethoxy methacrylate

Urethane dimethacrylate

Triethylene gycol dimethacrylate

Silanated barium glass powder

Amorphous fumed silica

Diferences between different types of composite fillers

• CONTRAINDICATIONS
  

If allergic to methacrylate resins. Avoid prolonged inhalation and contact with skin.

• STORAGE CONDITIONS
  

store between 10’ to 25’C. Keep away from moisture.

• SHELF LIFE

3 years from date of manufacturing

• PRECAUTIONS
  

 Eugenol-containing materials should not be used with this material because they may effect polymerization and interfere with the hardening process. Being sensitive to heat and light, the syringes should be kept away from direct heat and light.

Combo Kit :-

• 7 Syringes
• 7 X 4g syringes (A1.A2. A3.A3.5. B1. B2. B3)
• 1 x 5ml Bottle Fusion Bond 5
• 1 x 2 ml syringe Actino Etchant Gel
• 10 x Micro Brushes
• 10 x Applicators Tips
• Instruction Manual

Instructions for use :

 Step 1– Clean the tooth to be treated and adjacent  teeth with a brush and prophy paste and select the shade using Shade Guide.

Step 2- Prepare the cavity

(No residual amalgam or other base material should be left in the cavity)

Step3- Apply Actino 37% Phosphoric Acid Etchant Gel for 15-20 sec.

Remove Gel with vigorous water spray and rinse conditioned area for at least 10 sec.

Blot dry conditioned area with a moist cotton pellet.

Step 4- Apply Fusion Bond 5 dentine bonding agent with a disposable brush to the entire cavity.

Ensure thorough wetting of the entire cavity.

Allow 20 sec air drying and re apply another coat of dentine bonding agent.
Remove excess solvent by gently drying with dry air for at least 5sec to ensure uniform glossy surface.

Cure adhesive for 20-30 sec using standard curing light.

Step 5- Dispense the material using shaping instruments. Contour the material in the cavity. Light cure for 40 sec using standard curing light. When necessary build in increments of 2mm maximum using a layering technique. Shape and polish using standard technique and at last stage apply Nano Coat protective varnish.