Prevest Fusion Bond 7

Fusion Bond 7 / Fusion Self Etch Bond combines the ingredients needed for
etching, priming, and bonding into a single adhesive, thereby eliminating separate etching and
priming steps of the bonding process. Fusion Bond 7 / Fusion Self Etch Bond adhesive can be used
for the bonding of both direct and indirect restorations.

Composition :

Hema Phosphate, Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate,
Bisphenol A Diglycidyl Methacrylate, 2-Hydroxy Ethyl Methacrylate, Water, Tertiary Butanol,
Photoinitiators, Stabilizer.

Indications :
Direct Applications :
1. Light-cured composite and compomer restorations.
2. Composite/ceramic/ metal repairs.
3. Cavity sealing for amalgam restorations.
4. Light-cured or dual-cured core build-ups (always light-cure an incremental build-up of core
material).
Indirect Applications :
1. Veneers 2. Porcelain, composite, and metal-based inlays, onlays, crowns, bridges. 3. Endodontic
posts. 4. Cavity sealing as a pretreatment for indirect restorations.

Instruction for use :

Bonding Composites/Compomers to Dentin/Enamel Veneers, crowns,
bridges, inlays, onlays and metal-based restorations (used in conjunction with a luting cement)
1. Prepare cavity. Wash thoroughly with water spray and air dry (Do not desiccate). Note : For
optimal adhesion, always prep (bevel) all enamel and/or margins prior to application of Fusion Bond
7 / Fusion Self Etch Bond adhesive.
2. Shake Fusion Bond 7 / Fusion Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake
adhesive bottle vigorously for 20 – 30 seconds.
3. Dispense 2-3 drops of Fusion Bond 7 / Fusion Self Etch Bond adhesive into a clean well. Replace
cap immediately after dispensing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin
surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of Fusion Bond 7 / Fusion Self Etch Bond adhesive with a brushing
motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air.
7. Light cure for 20–30 seconds.
8.Apply composite according to manufacturer’s instructions for use.
Instructions for bonding Indirect Restorations :
1. Clean the preparation. Wash thoroughly with water spray and air dry (Do not desiccate).
2. Shake Fusion Bond 7 / Fusion Self Etch Bond adhesive bottle briefly. Note : Upon first use, shake
adhesive bottle vigorously for 10 sec.
3. Bottle Delivery : Dispense 2-3 drops of Fusion Bond 7 / Fusion Self Etch Bond adhesive into a
clean well. Replace cap immediately after dispensing.
4. Using the disposable applicator brush, apply a generous amount of adhesive to the enamel/dentin
surface. Scrub the surface with a brushing motion for 20 seconds.
5. Apply a second application of Fusion Bond 7 / Fusion Self Etch Bond adhesive with a brushing
motion for 20 seconds.
6. Dry the adhesive with gentle air first and then medium air for at least 5 seconds with oil-free air.
Avoid pooling of adhesive before light curing. Light cure for 20–30 seconds.

Contraindications :
1. Do not use Fusion Bond 7 / Fusion Self Etch Bond adhesive if a patient is known to be allergic to
any of the material’s ingredients or if the stipulated working technique cannot be used.
2. Fusion Bond 7 / Fusion Self Etch Bond adhesive must not be used in conjunction with purely self
curing composite materials. Dual-curing materials must be light activated.
3. Do not use Fusion Bond 7 / Fusion Self Etch Bond adhesive for direct pulp capping.

Product Packaging

Intro Pack:

• 1 x 5ml Squeeze Bottle

Economy Pack:

• 2 x 5ml Squeeze Bottle, 40 x Micro Brushes