3m KETAC CEM

• Low film thickness
• Radiopaque
• Fluoride release
• Working time (including mixing): 3:30 min
• Setting time (from begin of mix): 7:00 min.
• High level of biocompatibility
• Simple and user-friendly cementation material

Radiopaque Permanent Glass Ionomer Luting Cement

Indications:

• Permanent cementation of inlays, onlays, crowns and
• bridges made of metal or porcelain-fused to metal (PFM), all-aluminia or all-zirconia strengthened core ceramic systems (e.g. Lava™ Crowns & Bridges)
• Permanent cementation of endodontic posts and orthodontic appliances made of metal
• Cavity lining

Composition:

• Powder- Glass powder, Water, Polycarboxylic acid
• Liquid- Tartaric acid, Pigments, Conservation agents
• Working time incl. mixing- 3min
• setting time- 7 min (from the start of the mix)

• 1 x 33g Powder
• 1 x 12ml Liquid
• 1 x Spoon
• 1 x Mixing pad

• STEP 1- Prep the tooth. Thoroughly clean the tooth.
• STEP 2- Gently dry the preparation. Do not over-dry.
• STEP 3- Dry the restoration with air.
• STEP 4- Shake powder in a bottle to fluff. Dispense 1 level scoop of powder. Dispense 2 drops of liquid. Add powder to liquid in one portion and mix. When properly mixed, the material should stretch 1/2 from the pad or slab.
• STEP 5- Place a thin, even layer of cement on the inner surface of the restoration. Do not use the mixture if it has lost its gloss.
• STEP 6- Seat the restoration without pressure and remove excess.